Cambium Networks 3GHz 450b High Gain Antenna Assembly
Sold as a 4-Pack
SKU
N030045D001A
Weight
32 lb
Stock Quantity
238 USA | 14 CAN
The Cambium 450b 3GHz High-Gain Antenna Assembly is sold as a 4-pack, and is part of the 450 platform.
This platform contains ultra-wide band radios that function in the 3.3GHz to 3.9GHz frequency range and capable of up to 300Mbps aggregate in a 40MHz channel.
Product Features- Gigabit Ethernet Interface provides the maximum transfer rates to the device
- CBRS CBSD Category B device
- 3.5mm audio jack allows direct connection of headphones for alignment without any adapters
- New System on a Chip (SoC) enhances Packet Processing Power more than 4x that of the 450 SM
- 2x2 MIMO OFDM
- Ethernet Interface: 100/1000 BaseT, full duplex, rate auto negotiated, 802.3 compliant
- Network Management: IPv4/IPv6 (dual stack), HTTP, HTTPS, Telnet, FTP, SNMPv2c and v3, Cambium Networks cnMaestro
- 4-pack antenna assembly
- High gain 3GHz 450b radio: C030045B021A
- PoE injector and line cord: N000900L001D and WC-N000900L007A
- Optional glands to enhance to IP67: N000000L135A
- Optional radome: N000900L021A
| Interface | |
| MAC (Media Access Control) Layer | Cambium Networks proprietary |
| Physical Layer | 2x2 MIMO OFDM |
| Ethernet Interface | 100/1000 BaseT, full duplex, rate auto negotiated, 802.3 compliant |
| Protocols Used | IPv4, IPv6, UDP, TCP/IP, ICMP, Telnet, SNMP, HTTP, FTP |
| Network Management | IPv4/IPv6 (dual stack), HTTP, HTTPS, Telnet, FTP, SNMPv2c and v3, Cambium Networks cnMaestro |
| MTU | 1700 bytes |
| VLAN | 802.1ad (DVLAN Q-inQ), 802.1Q with 802.1p priority, dynamic port VID |
| Security | |
| Encryption | FIPS-197 128-bit AES, 256-bit AES (Requires Optional License for attached Access Point) |
| Performance | |
| PPS | 50,000 |
| ARQ | Yes |
| Ultimate Sensitivity | -94 dBm |
| Maximum Deployment Range | Up to 64 km (40 miles) in PMP mode, up to 200 km (124 miles) in PTP mode |
| Latency | 3 - 5 ms, typical |
| GPS Synchronization | Yes, synchronized by Access Point or via 3.5mm port using cnPulse (for PTP mode) |
| Quality of Service | Diffserve QoS |
| Physical | |
| Antenna Accessories | Optional Radome: N000900L021A |
| Surge Suppression | EN 61000-4-5: 10x700 ?s, 4 kV, EN 61000-4-2: ESD 30 kV contact / 30 kV air |
| Mean Time Between Failure | 40 Years |
| Environmental | IP55; Optional glands to enhance to IP67 - Part number N000000L135A |
| Temperature / Humidity | -40°C to 60°C (-40°F to 140°F), 0-95% non-condensing |
| Weight | 3.1 kg (7 lb) (includes mounting bracket) |
| Dimensions (Diameter x Depth) | 45 cm x 28 cm (17.8 in x 11.2 in) |
| Pole Diameter Range (w/ included mount) | 2.5 cm to 7.6 cm (1 in to 3 in) ± 20 degrees mechanical tilt |
| Power Consumption | 12 W typical, 15 W peak |
| Input Voltage | 20-32 VDC, Canopy-style PoE |
| Link Budget | |
| Transmit Power Range | 56 dB dynamic range (to EIRP limit by region) (1 dB step) |
| Maximum Transmit Power | +29 dBm (MIMO, combined polarities) |
| Certifications | |
| ISED Canada | 109W-0053 |
| FCC ID | Z8H89FT0053 |
| ETSI | EN 302 326-2 |
Related Products
SKU DPR-F140
SKU KPPA-J-ARM
Call for availability
SKU KPPA-J-ARM-24-2P
SKU KPPA-J-ARM-39-4P
SKU C030045B021A
SKU CYG-CPCNAC5-3FT
