Tarana Wireless G1 3.55-3.70Ghz Base Node (BN) CBRS

90° sector, up to 200 RNs, 2.4Gbps Capacity, 2x 40MHz Independent Carriers, N+1 Channel Reuse





45.3 lb

Stock Quantity

Call for availability

The Tarana Wireless 3.55-3.7 GHz G1 base node combines the ease of mobile macro-cellular radio access network deployment with a simple network architecture common in fixed access.

The G1 platform includes compact base nodes (BNs, each a single integrated package that includes antennas, PAs, several teraflops of digital signal processing, managed Ethernet switching, and 10G optical network interfaces) communicating with up to 256 similarly self-contained remote notes (RN), Tarana's Customer Premise Equipment, per BN. Tarana Remote Nodes are powered over an Ethernet cable run into the structure that they serve.

Product Features
  • Up to 800Mbps aggregate throughput per link
  • Up to 9.6Gbps capacity/site / 80 MHz channel (using free, unlicensed spectrum)
  • 1024 users/site (256 / sector)
  • Industry-first cancellation of unlicensed-band interference
  • Simple cellular deployment model
  • ~2x cellular range in NLoS or LoS conditions
  • Compact, integrated base node and low-cost remote node
  • Enhanced TR101 Broadband Forum network architecture (no complex packet core required)
  • Comprehensive cloud suite for planning, zero-touch config, monitoring, SDN management, and support automation
  • Software-defined radios, enabling automated, cloud-managed performance upgrades
What's in the box?
  • 1x Tarana Wireless G1 3.55-3.70GHz CBRS Base Node (BN)
  • 1x Grounding Lug
What's sold separately:
  • Base Node (BN) Pole Mounting Kit 64-114mm (2.5-4.5in) Pole Diameter (34-0028-001)
  • SFP+ Long Range Industrial Temp Duplex LC Connector Single Mode (73-0031-001)
  • Outdoor Single Mode Fiber Optic Cable with Harting SFP to LC 100m (33-0022-100)
  • 5m Outdoor Shielded Cat5e Ethernet Cable with Harting Push-Pull Connector (33-0007-005)
  • 5m Outdoor Shielded Power Cable with Harting Push-Pull Connector (33-0004-005)
Radio Network ElementsBase Node
TopologyScheduled, concentrated multi-point
Maximum # of Users256 (per BN)
1024 (per site with 4 BNs)
Channel Bandwidth80Mhz (2 x 40Mhz)
Aggregate Throughput (UL +DL)Per Link 800Mbps
Per BN 2.4Gbps
Per site 9.6Gbps (4 BNs)
Downlink / Uplink RatioConfigurable 2:1 or 4.5:1 (network-wide)
ModulationQPSK 1/2 to 256 QAM 7.35/8 UL/DL
MIMO Streams Per Link1x1, 2x2
MU-MIMO Streams at Aggregation Point6 MU-MIMO streams per BN
24 MU-MIMO streams per site
Spectral Efficiency3bps/Hz per BN
75 - 90bps/Hz per band
Configuration dependent
Range (full rate, frequency dependent)NLOS: up to 3km
LOS: Up to 15km
Recommended Frequency Reuse FactorUniversal frequency reuse (k=1)
Enabled by advanced self-interference cancellation
Form FactorOutdoor micro enclosure
(fully-integrated antenna, RF, and baseband)
4 BNs for 360° coverage
BeamformingAuto-convergent, retro-directive
Interference ManagementSelf-interference cancellation,
Advanced Burst Intereference Cancellation (ABIC)
SchedulerAdvanced 4D frame-based scheduling
Frequency Support3.550-3.700GHz (US CBRS)
Latency (1-way avg)< 5 msec
Model NumbersBN CBRS (Cat B) G1-BN3ASI001
ComplianceRSS-247, FCC 15E, FCC Part 96, WINFF-TS-0122
SafetyIEC 62368-1, IEC 60529, IEC 60950-1, IEC 60950-22
Tarana Cloud SuiteScalable Microservices based multi-tenant network management
Zero-touch provisioning and control of radios with streaming telemetry
Firmware and configuration management
24x7x365 KPI monitoring and management
Fault management and historical events
Network Analytics
SAS-Domain Proxy
Northbound Rest-API for Customer and operator portal (B/OSS)
InterfacesDual 10-Gbps SFP+ and one 1-Gbps data interfaces
Additional 1 Gbps mgmt Ethernet interface.
-48V DC Power
HxWxD (inches)16.4 x 21.2 x 4.6 in.
Weight (lb.)42 lbs.
Power Consumption (Typical)275W
MountingSaddle clamp, band clamps for pole mount (2-3/8" - 5" OD)

Shopping Cart Share Cart


Thank you! We will be in touch shortly.