WAV LLC supplies the Mimosa B11 point to point (PTP) backhaul radio, 11 GHz. The B11 is designed for the modern Internet era, adapting instantly to variable upstream and downstream bandwidth requirements. eCommerce Product Detail WAV

Mimosa B11 Point To Point (PTP) Backhaul Radio 11 GHz, 1.5 Gbps

SKU: B11

Price: $2,099.00

 

WAV LLC supplies the B11 point to point (PTP) backhaul radio. As Mimosa’s first entry into the backhaul market, this radio is designed to be flexible to meet any bandwidth directional demands. It only takes one radio to cover an entire licensed 10.7 - 11.7 GHz spectrum, allowing for a faster deployment. The network design tools will give you a quick look into the connection by showing you nearby licensed links across the band via the FCC licensed database.



• Superior performance: with up to 1.5 Gbps aggregate speed and under 1 ms latency, high performance has never been this affordable. The B11 has the lowest cost per Mpbs in the industry with link distances over 100 km

• Ultra rugged: carrier grade IP67 design allows the B11 to withstand the harshest of environmental conditions

• Night and day: the B11 dynamically adapts to bandwidth demand using auto-TDMA technology, maximizing spectrum utilization throughout the day

• Monitor with rase: assessing link health and identifying potential problems has never been easier. Links are continuously monitored by our Mimosa cloud service with rich data collection and analysis

• right on target: Mimosa has taken the guesswork out of antenna aiming by adding 2.4 GHz Wi-Fi right in the radio, turning any smartphone into the most sophisticated aiming tool on the planet

Performance

Max ThroughputUp to 1.5 Gbps IP aggregate UL/DL (1.7 Gbps PHY)
Low Latency2+ ms
Wireless ProtocolsTDMA, TDMA-FD

Radio

MIMO & Modulation4x4:4 MIMO OFDM up to 256QAM
BandwidthSingle or Dual 20/40/80 MHz channels
Frequency Range10000-11700 MHz restricted by country of operation
Max Output Power20 dBm (2-stream), 27 dBm (4-stream)
Sensitivity ( MCS 0 )-87 dBm @ 80 MHz -90 dBm @ 40 MHz -93 dBm @ 20 MHz

Power

Max Powe Consumptionr30W
System Power Method48 V DC 802.3 at compliant power injectors
System Lightning & ESD Protection6 Kv
PoE Power SupplyPassive POE compliant, 48-56 V Power over Ethernet supply with IEC6

Physical

DimensionsHeight: 260 mm (10.2") Width: 158 mm (9.6") Depth: 70 mm (2.8")
Weight2 kg (4.5 lbs)
Enclosure CharacteristicsOutdoor UV stabilized plastic Aluminum mounting panel
Wind Survivability200 km/h (125 mph)
Wind Loading9.89 Kg @ 160 km/h (21.8 lbs @ 100 mph)
MountingCircular Waveguide fed mounting bracket direct into antenna Optional Data Connector SFP Cage

Environmental

Outdoor Ingress Protection RatingIP67
Operating Temperature-40°C to +55°C (-40°F to 131°F)
Operating Humidity5 to 100% condensing
Operating Altitude4420 m (14500') maximum
Shock & VibrationETS 300-019-2-4 class 4M5

Features

Gigabit Ethernet10/100/1000-BASE-T
Fiber Port10/100/1000-BASE-T
Dual Protocol Operation2 dual-stream radios operating on non-contiguous frequencies allow for traditional FDD-like performance or TDMA Automatic load balancing of traffic across 4 total MIMO streams with individual stream encoding up to 256 QAM
Management ServicesMimosa cloud monitoring and management SNMPv2 & Syslog legacy monitoring HTTPS HTML 5 based Web UI 2.4 GHz 802.11b/g/n radio for local management access Smart Antenna Alignment Hands-free dedicated 2.4 GHz Wi-Fi management radio alignment tool
Smart Spectrum ManagementActive scan monitors/logs ongoing RF interference across channels (no service impact) Dynamic auto-optimization of channel and bandwidth use
Security128-bit AES PSK with hardware acceleration
QoSSupports 4 pre-configured QoS levels
Colocation Synchronization1PPS GPS TX/RX synchronization for colocated co-channel radios Adjustable up/downstream bandwidth ratio
GPS LocationGNSS-1 (GPS + GLONASS)

Regulatory + Compliance

Approvals*FCC Part 101 and EN 302 217-2-2
RoHS ComplianceYes
SafetyUL/EC/EN/ 60950-1 + CSA-22.2