Cambium Networks ePMP 4500 5GHz 8x8 Integrated Access Point Radio
- SKU: C058940A122A
$2,499.00
+ $112.46 Tariff
- Manufacturer: Cambium Networks
- Data Sheet: Download
Product Information
The ePMP 4500 delivers more than 4 Gbps and supports up to 120 subscriber modules. Featuring 8x8 MU-MIMO, the 5GHz ePMP 4500 can transmit to four Force 400 SM’s at the same time. This effectively quadruples the capacity of 2x2 systems and in the process, increases link budgets by 6dB with downlink beamforming. The ePMP 4500 has an integrated 90º 8x8 MU-MIMO sector antenna. With TDD synchronization, ePMP 4500 networks can scale to thousands of end users leveraging a small number of channels.
Product Features- High-performance, scalable and reliable access points for fixed wireless broadband
- ePMP 4500 features MU-MIMO and up to 4Gbps in performance
- Low TCO with three-year hardware warranty
- Interoperable with all Force 400 and Force 300 Subscriber Modules
- Frequency Range Wide Band Operation: 4910–6135MHz
- Channel Width: 20 | 40 | 80Mhz
- Proprietary Physical Layer: 8x8 MU-MIMO/OFDMA based on 802.11ax underlying technology
- Subscribers per Sector: Up to 120
Specifications
Specifications C058940A122A
| Channel Width | 20 | 40 | 80 MHz |
| Proprietary Physical Layer | 8x8 MU-MIMO/OFDMA based on 802.11ax underlying technology |
| Channel Spacing | Configurable in 5 MHz increments |
| Frequency Range | Wide Band Operation 4910–6135 MHz |
| (Note: Allowable frequencies and bands are dictated by individual country regulations) | |
| MAC Layer (Media Access Control) | Cambium Proprietary |
| Ethernet Interfaced | 100/1000 BaseT, rate auto negotiated, 802.3bt compliant & Aux SFP port |
| Supported Powering Methods | 56V 30W PoE (included), standard 802.3bt PoE Supply, or cnMatrix Tower Switch, or wired DC input |
| Protocols Used | IPv4/IPV6, UDP, TCP, IP, ICMP, SNMPv2c, HTTPs, STP, SSH, IGMP Snooping |
| Network Management | HTTPS, SNMPv2c, SSH |
| VLAN | 802.1Q with 802.1p priority |
| Performance | |
| Subscribers per Sector | Up to 120 |
| ARQ | Yes |
| Nominal Receive Sensitivity (w/FEC) @20 MHz Channel | MCS 0 = -91 dBm to MCS 11 (1024 QAM-5/6) = -62 dBm (per chain |
| Nominal Receive Sensitivity (w/FEC) @40 MHz Channel | MCS 0 = -88 dBm to MCS 11 (1024 QAM-5/6) = -59 dBm (per chain) |
| Nominal Receive Sensitivity (w/FEC) @80 MHz Channel | MCS 0 = -85 dBm to MCS 11 (1024 QAM-5/6) = -57dBm (per chain) |
| Modulation Levels (Adaptive) | MCS 0 (BPSK) to MCS 11 (1024 QAM-5/6) |
| GPS Synchronization | Yes, via Internal GPS or Cambium Sync |
| QoS (Quality of Service) | Three level priority (Voice, High, Low) with packet classification by DSCP, COS, VLAN ID, IP & MAC Address, Broadcast, Multicast and Station Priority |
| Performance cont’d | |
| ePMP 4500 | |
| Transmit Power Range | 0 to +34 dBm (combined, to regional EIRP limit) (1 dB interval) |
| Antenna | Integrated 8x8 MU-MIMO 90º Sector 17 dBi gain |
| Surge Supression* | 1 Joule Integrated |
| Environmental | IP67 |
| Temperature | -30°C to 55°C (-22°F to 131°F) |
| Weight | 14.66 kg (32.32 lbs) with clamp |
| Dimensions (H x W x D) | 643 x 487 x 157 mm (25.3 x 19.2 x 6.2 in) |
| Power Consumption | 32W Maximum |
| Input Voltage | 44V to 59V |
| Sector Antenna Connection | Integrated 90º Sector |
| GPS Antenna Connection | 1 x 50 ohm, SMA; Integrated GPS Antenna |
| Security | |
| Encryption | All models: 128-bit AES (CCMP mode) |
| Certifications | |
| ePMP 4500 | |
| FCCID | Z8H89FT0065 |
| Industry Canada Cert | 109W-0065 |
| CE | See Cambium Website for Declaration of Conformity |