Product Information
ISP Supplies supplies the Cambium Networks PTP 820E all-outdoor E-band radio, featuring 1Gbps, Lo, TX 71-76GHz, RX 81-86GHz.
PTP 820E, a Millimeter wave E-band radio capable of 1024 QAM with ACM:
• Support 71-76 GHz, 81-86 GHz
• Supports 1+0, 2+0 configuration
• Built-in frequency scanner to determine the current interference level for each channel
PTP 820E E-band radio is a compact full outdoor high-capacity backhaul operating in the E-band. PTP 820E supports 62.5, 125, 250, and 500 MHz channels and delivers up to 2.5 Gbps Ethernet throughput. PTP 820E also supports multiband configurations with PTP 820C or PTP 820S and shares a single multiband antenna. Multiband configuration enables operators to benefit simultaneously from the high capacity of E-band and the high reliability of microwave. PTP 820E shares the same UI and similar features as the PTP 820 series.
Specifications
Specifications C800082B007A
| RADIO | • 71-76 GHz, 81-86 GHz • 1+0, 2+0 • Multiband with PTP 820C |
| Radio Features | BPSK to 1024 QAM w/ACM |
| Ethernet Interfaces | |
| Port 1 | RJ45, 10/100/1000Base-T, PoE |
| Port 2 | SFP cage which support regular SFP 1Gb/s (Eth 2), or CSFP 1Gb/s (Eth2 + Eth3) |
| Port 3 | : Two options: o 1x10/100/1000Base-T used for management only; OR o SFP cage which support regular SFP 1 Gb/s (Eth1), or SFP+ 10Gb/s (Eth1) |
| Note | SFP devices must be of industrial grade (-40°C to +85°C) |
| Ethernet Features | MTU – 9600 Bytes • Quality of Service Multiple Classification criteria (VLAN ID, p-bits, IPv4, DSCP, IPv6 TC, MPLS EXP) 8 priority queues per port Deep buffering (configurable up to 64 Mbit per queue) o WRED o P-bit marking/remarking • 4K VLANs • VLAN add/remove/translate • Frame Cut Through – controlled latency and PDV for delay sensitive applications • Header De-Duplication – Capacity boosting by eliminating inefficiency in all layers (L2, MPLS, L3, L4, Tunneling – GTP for LTE, GRE) Note: Not available on 500MHz channels • Adaptive Bandwidth Notification (ABN), also known as EOAM |
| TECHNICAL SPECIFICATION | |
| Dimensions (Direct Mount) | Dimensions (Direct Mount): 220mm(H), 198mm(W), 75mm(D), 3kg |
| Dimensions (43dBi integrated Antenna) | 280mm(H), 280mm(W), 110mm(D), 3.5kg |
| Pole Diameter Range (for Remote Mount Installation) | 8.89 cm – 11.43 cm |
| Environmental | -33°C to +55°C (-45°C to +60°C extended) |
| Power Input | |
| Standard Input | -48 VDC |
| IDU DC Input range | -40.5 to -60 VDC |
Add-Ons
